Skip to content. Skip to navigation

LoonaWeb

Sections

Personal tools

You are here: Home → sirblog → Standard paper

About the SirBot Project: The SirBot Project is a framework on which you can easily build robots. Have a look at the SirBot Labs to see what can be done with it !; Here's the Tamabot DayCare, the bot that takes care of your tamagotchi !!!

And the SirBot Ranger is able to measure distances, and detect obstacles such as fruits...

Recent entries: PCB using toner transfer method: video and comparison sirloon 2008-08-01; New boards available from SirBot sirloon 2008-06-16; I2C com. with two 16F88 (master/slave) using Jal v2 sirloon 2008-04-29; PCB using toner transfert method, another try sirloon 2008-04-22; Experimenting PCB board creation using a laser printer sirloon 2008-04-15

Categories: SirBot Project; General; Geek; Ouvertures faciles

Standard paper

Posted by Jorge at 2008-10-07 22:06

Excelent!
I use standard paper as you suggest, the result was... amazing!
I was using glosy 260gr before, but is very impredictable and get a lot of mistakes.

Tanks!

Parent entry How to create boards with vias and straps with Eagle ?