Personal tools
You are here: Home → Members → Electronic → SirBot Project → Modules → Bus Cable
Document Actions

index.html

by Admin — last modified 2006-08-15 12:01

Bus Cable

Sebastien Lelong

Loonaweb
 SirBot

2006

Revision History
Revision Revision: 1.2 Date: 2006/04/11 06:42:10
Initial creation

The Bus Cable is able to connect different boards, using connection specification. No need to think about which wire needs to be connected where, just plug...

Table of Contents
1. Electronic diagram
2. Electronic assembly
3. Results
4. Tests

1. Electronic diagram

No diagram, the Bus Cable is just two connectors with wires (in layer). Connectors can be added between extremities.

The following picture describes the connections of the cable, while connected to the Main Board (the bus cable is a way to "propagate" connections from the main board to other module).

2. Electronic assembly

The following pictures show the implementation of the cable

3. Results

A bus cable

Yet another bus cable

4. Tests

For each pin on one side, just be sure it's connected to the good one (and just one) pin on the other side...

Powered by Plone Powered by Gentoo